Lithium battery electric mosquito swatter-Ems-Gtb

Fulfilled By Local Seller

Fulfilled by local sellers. The average delivery time is 3~5 workdays

Product name: Lithium battery electric mosquito swatter (wd-947 lithium battery electric mosquito swatter)

Input interface: USB

Light source: 360-400nm LED

Rated power: 2W

Net shooting output voltage: about DC3000v

Battery capacity: lithium battery 1200mAh

Charging input: DC5V=1A

Product size: 53*22cm (including base)

Charging time Material: Shell ABS

Weight: about 360g

matters needing attention:

1. When the electric mosquito swatter is working, there is high voltage on the metal mesh surface! Keep away from children and prevent children from getting electric shock. Do not touch the metal mesh with your hands or with metal objects in your hands. High voltage is dangerous. Please pay attention to safety!

2. Do not use this product in the place where there may be flammable gas or explosive dust, and do not often use metal and other conductive objects to spark on the metal mesh

3. After use, please push the power switch to the OF position;

4. To ensure the service life of the battery, in the process of use, if there is no obvious effect to hit mosquitoes, or the bottom battery power indicator flashes, it means that the battery power has been basically used up. Please stop using and charge the product in time. Otherwise, when the lithium battery voltage is lower than 2.8V, the product's low-voltage protection function will make the product enter the protection state, and the product cannot work, so it must be charged before use

5. If the product is not used for a long time, it should be recharged every three months for about three hours. The product should be stored in a ventilated, dry place with a relative temperature less than 80%. There should be no corrosive chemicals around.

6. Do not use a wet towel to wipe or wash the mosquito remains on the net surface with water. Use a long hair soft brush or tap several times to shed the mosquito remains, which may cause a short circuit on the metal net surface. If the electric mosquito swatter is damaged, please remove it in time);

7. Please do not pat other hard objects or pinch the product mesh surface to avoid damaging the metal mesh surface

8. Please operate in strict accordance with the instructions and precautions, and do not disassemble at will. Our company will not bear any responsibility for the adverse consequences caused by illegal operation;

Warning!

This electronic mosquito swatter should be far away from children and not suitable for barns, barns and similar places. It is strictly prohibited to contact the metal net during charging and working, and it is strictly prohibited to use it in the environment of combustible gas, gas, flammable and explosive materials and dangerous chemicals.